Please come back with any progress you have made entering Service More, because that’s the key to success. Running Qimage every 55 hours is a total waste of your time, paper, ink and money, because it wastes more ink than you could ever save by just leaving the printer off, with a Printer Potty fitted this can be checked accurately and dispelled as just myth. The maintenance cartridge cannot be replace by most owners because it requires special tools to accomplish the task but that is not necessary if you can install a Printer Potty, O’ and Humidity does not affect the waste ink contents. The first thing you need to do is to see if it’s possible to enter Service Mode and while there reset the ink counter and then print an EPROM repost sheet, the information on how to do this is contained within your Service Manual.īut before you start you’ll also need Service Tool V3400 to complete the process, if in deem that is possible because not all Pro 1’s can enter Service Mode and if you can’t then all the other avenues are closed to you and you must send the printer to a Service Agent. Image, to start with, you have a very good printer there but it did way more than 100 prints and that is reflected by the maintenance cartridge been full, so I reckon you’ll need to add another couple of zeros to the page count.
